SHH Shifter (+ opt. Handbrake) Mount - Playseat Challenge

thingiverse

This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the TH8A mount from floano. SHH Shifter with TH8A Mount: https://www.shiftershh.com/en/extra-mounts/21-152-soporte-extra-th8.html Handbrake (with Discount Code) from Aliexpress: https://a.aliexpress.com/_mOtXRI3 You need to print the Mount-Clamp and one of the mounting options - SHH Shifter - SHH Shifter + Handbrake (If you'd like a Handbrake only mount, please add a comment) The mount is build for the TH8A mounting option from SHH Shifter You will need - 4 x M4 bolts, 30 mm (or longer, I used 35mm) - 4 x M4 nuts and washers (these are included with your SHH Shifter). You can't use the bolts included with the SHH Shifter, as these are too short. Additionally, I wrapped some anti-slip tape around the tube to increase the grip and added double-sided tape within the clamp. If you want to print the SHH Shifter + Handbrake mount, you'll need additionally - 4 M6 x 30mm (or longer, I used 40mm) - 4 M6 Nuts and washers (4 or 8) I printed with a 0.6 nozzle, 0.45 layer height, 0.72 layer width and 35% infill. It printed in around 12 hours. If you use a smaller nozzle you might want to print with more walls and 0.48 layer width to make sure the walls are 4mm+ thick. Another recommendation: Add support blockers in the mounting holes to avoid frustration (see screenshot of Cura for orientation and support blockers) For Left Hand Drive mirroring in your slicer should do the trick. Happy shifting, braking and printing ✌️