Shelly 1 Box

thingiverse

Looking for a way to house your low voltage Shelly 1 or Shelly 1PM project? Hopefully this model will help! Simply print the ShellyBox file to hold your relay, then whichever version of the lid that you prefer. <strong>Box:</strong> <ul> <li>Print in “normal” orientation with 3 perimeters/walls. No supports or brim required.</li> </ul> <strong>Lid:</strong> <ul> <li>Print with the top face on the build plate and 3 perimeters/walls. No supports or brim required.</li> <li>Two versions are offered - one w/ a WiFi logo, the other plain. You can use whichever you like better! As the lid relies on a snap fit, it may be necessary to scale to lid very slightly to obtain the desired fit depending on the clearance tolerances of your printer</li> <li>For the version w/ the WiFi logo, the Insert file can also be printed to add an accent color. You could, of course, leave the logo open for a vented look if you wish. Your choice! Simply use a couple drops of super glue or epoxy to affix the Insert to the inside face of the lid.</li> </ul> <strong>Insert:</strong> <ul> <li>This piece is symmetrical, it doesn't matter which side faces up/down. No brim required.</li> Check out <a href="https://www.printables.com/model/523097-shelly-1-box>this model on Printables</a> for a further description of the project, and a video link for with instructions!