Shapeoko vacuum hose mount and adapter

prusaprinters

<p>I recently got the Shapeoko 3 xxl and needed a vacuum adapter and i didnt like how the hose would pull on the Sweepy dust boot so i made a support bracket that mounts around the neck of the router to add a bit more support to the vacuum hose and an adapter that fits nicely on the ridgid 1 7/8 inch vacuum hose. This also allows you to remove the adapter from the mount easily to clean up around your work space as well with out having to switch to a different vacuum nozzle.</p> <h3>Print instructions</h3><h3>Category: Tools Summary</h3> <p>I recently got the Shapeoko 3 xxl and needed a vacuum adapter and i didnt like how the hose would pull on the Sweepy dust boot so i made a support bracket that mounts around the neck of the router to add a bit more support to the vacuum hose and an adapter that fits nicely on the ridgid 1 7/8 inch vacuum hose. This also allows you to remove the adapter from the mount easily to clean up around your work space as well with out having to switch to a different vacuum nozzle.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> .2mm</p> <p><strong>Infill:</strong> 100%</p> <p><strong>Filament:</strong> Polymaker Polylite ASA Black<br/> <strong>Notes:</strong></p> <p>i used infill at 100% for extra strength but im sure it could be done at less and work fine.</p>