Shallower (shorter) double drawer case for Ender 3 (CC-BY)

thingiverse

Shallower than the original. Incl. new Top drawer. This does <i>not</i> fit the Pro, Max, and V2 version. ## Why The original drawer case was colliding with the Y axis roller screws of my printer and needed to be a little bit shallower. ## Design Details 3mm shallower than the original, 50mm high in total. Has more holes to reduce material need. Modified the v-slot inserts to make installation easier. X axis pulley has to be still remove, though. Case measures 50mm from top to bottom. Top drawer included (but the handle looks different). Original Bottom drawer can still be used with this. I also used it with the spacer from the original Thing (enlarged in Z to 10mm) to avoid danger of squishing the display ribbon cable. Included from the original thing are: - 5mm_spacer.stl - Drawer_Bottom_Version_3.stl - New_Bottom_Drawer.stl - Drawer_Bottom_Version_2.stl ## Print Instructions Print case upright. Print drawer laying flat. Infill can probably be reduced. I printed the first few millimeters of the case and then aborted the print to make sure that it fits with the current screw length because measuring the distance screw to v-slot insert was very difficult. ## Assembly Instructions 1. Remove display with supplied 4mm allen key. 2. Remove Y pulley 3. Insert drawer. 4. Re-mount display again. 5. Re-mount Y pulley. 6. Insert drawers Thing might have problems with Button Box addons. ### Materials Needed nothing (4mm allen key to remove the display) (All product links are MakerBot affiliate links. I do not get <i>anything</i> from these links.)