Settlers of Catan magnetic trays - small cards

myminifactory

Hi! This is a remix of https://www.thingiverse.com/thing:1471610 by rustybaker22 and https://www.thingiverse.com/thing:2945049 by DeemEnded. Made from scratch in fusion 360. Designed for smaller size cards. Mine are **67,5mm x 43,5mm**. Added front wall with cavity for finger. No icons on the tray - they would not be visible when cards are inside. Each tray should be printed in color representing material (yellow for cereal, red for clay etc.). Used the same magnets as in DeemEnded remix: spherical neodymium 6x2mm, like this: https://www.apexmagnets.com/6mm-x-2mm-disc-neodymium-rare-earth-magnet. Please note direction of each magnet. Schematic attached. https://cdn.myminifactory.com/assets/object-assets/5d6ce81a3fe57/images/1000X1000-magnets-direction.jpg?1567419563 DeemEnded user has made an explanatory picture you can also see in any further doubts. Direction of magnets may be examined using one as a reference. Stick it to any surface and test each next one using it. It will always autorotate and attach to the sample with the same direction. Magnets should fit into holes with little force. No glue is needed. If you have difficulties fitting, you can reduce "flow" parameter in Cura by 5-10%. **Edit 03/10/2019**: Added sleeves to keep cards in tray after play. Recommended printing method is one wall vase mode, spiralize outer contour, four to five bottom layers, 0.2mm layer height. PLA, ABS, or maybe even TPU can be used. Print one and try. It should fit tightly and work okay after a few slides. Resize in Cura by one to two percent if needed. Two versions of STL are available: for 0.4mm and 0.5mm nozzle.