Servo driven tracked rover w/suspensions (Remixed)

thingiverse

Unlike the original, this design requires only eight bearings or six hundred and eight, making it more economical without sacrificing the resistance of the wheels. In addition, I created a support for the Raspberry Pi 3 and another to hold an Lm2596 module to reduce the voltage of a four-cell battery that had fallen into disuse. The base.stl or Main is based on the design of diass07. https://www.thingiverse.com/thing:1736808/#comment-1202412 I did not edit the ServoGear, Left_skirt, right_skirt and track_175mm files, but I uploaded the original lynlim design for ease of use for the user who wants to download the project. ### 3D - Parts * x1 - base * x1 - Back Right2 * x1 - Back Left2 * x1 - Raspberry_Support * x1 - Raspberry_Support_2 * x1 - RaspberryMount * x3 - suspension damper Pin1 * x3 - suspension damper Pin2 * x8 - Taparueda * x2 - trackwheelBack * x2 - trackwheelTop * x4 - Trackwheelunder * x1 - Front * x2 - ServoGear * x1 - Left_skirt * x1 - right_skirt * x66 - track_175mm ### No 3D - Parts * x2 - Servo Motors MG996 Hacked for continuous rotation. * x6 - ballpen springs (the stiffer type) * x8 - Bearings 627z (7 x 22 x 7 mm), If you have 608, you need to fill... ### Electronic Hardware Whatever you want, but this design has * x1 - Raspberry PI 3 * x1 - Lm2596 To reduce a four-cell battery to five volts ### Videos https://youtu.be/eSGmJx5qcIA https://youtu.be/D8FEyVEkLp8