Separated Pinning Tray

thingiverse

Remix of a well designed pinning tray. I had some trouble printing the original pinning tray with my printer because it was not adhering well to the print bed. The first few layers would go down but gradually pull up as more layers were printed. The beveled edges seemed to be the main reason my printer was doing this. I also decided to split the pinning tray in half to allow an easier print (if your bed has any warping) and it also stores better by stacking up the two halves. There are 3 different files: Separated Pinning Tray - No Bevel: Squared up the bottom edge to remove the bevel. Separated Pinning Tray - Pinning: Right-side of the pinning try that holds the pins and springs. Separated Pinning Tray - Storage: Left-side of the pinning tray that holds the other parts of the lock. There was a good YouTube video that helped to explain why the original pinning tray (with the beveled edge) was pealing up as the higher layers were printed on my printer. The slight bevel combined with my old print-bed seemed to be just enough to allow the print to peal later in the print no matter how much I tried to level the bed: https://www.youtube.com/watch?v=HNAtHl6kB7Y Thanks to emtffkev for putting together a great original design on the pinning tray!