Senseo Schwimmer

thingiverse

Replacing Original Text with Spun Version: Replacement Parts for the Senseo Coffee Machine ================================================ To utilize neodymium magnets with dimensions of 6mm in diameter, 3 mm thick, I have incorporated an opening in the rear side, into which a magnet can be inserted during the printing process. Rotate the existing design by 90 degrees before printing, so that the opening for the magnet faces upwards. Pause the print at layer 83, move the extruder to its park position, insert the magnet, and resume printing. The photo featuring two swimmers illustrates the location of the mounting opening for the magnet. In the final assembly, this is not visible since five additional layers of material will be printed on top. Secure the remaining five layers and seal the magnet within the swimmer. Insert the swimmer with the magnet facing downwards into the tank, and secure it using the Senseo Tankclip (https://www.thingiverse.com/thing:1196269). Successfully tested with a Senseo Quadrante coffee machine.