Semi-printed document tray

thingiverse

This is my innovative semi-printed document tray design. Semi-printed means that the sidepieces are three-dimensionally printed, while the plates are sourced from different materials. The design is tailored to meet my specific needs. I had two glass plates from old document scanners at my disposal. The dimensions of these plates were approximately 340mm x 245mm x 3mm. The assembled object is relatively low in height because I wanted to place my notebook (which already rests on a triangular stand) on top of it so that the screen of the notebook aligns with my secondary screen. You can obtain the exact dimensions from the accompanying drawings. However, A4 documents can be accommodated within and placed atop this assembly. Assembly: All you need to do is print two sidepieces, insert one or two plates (wood, glass, metal, etc.) with a thickness of 3.5mm or less between them, and secure their position in place. You could drill holes or use glue (be cautious when selecting the glue) to fix the plates firmly. I utilized transparent silicone (approximately $2/€ per cartridge) to secure the glass plates within the sidepieces. The results were satisfactory. I even attempted creating a small silicone joint (as seen in the picture) with mixed outcomes. Benefits of this model: + It offers a unique and aesthetically pleasing document tray (... or other uses) + It likely serves as a good foundation for upcycling projects Drawbacks of this model: - The dimensions are as distinctive as the design itself - You will require a large printing surface to print this