Semi Ducted Micro Frame (Beecheese Frame V2)

thingiverse

This is a remix of my beecheeseframe based on stylesuxx's awesome cheeseframe. Print it with 100% infill. You can print it pretty fast with still good results. It will fit 8520 motors and 55mm props. The ducts are reduced to save weight and resized to fit bigger propellers. The 55mm props improve flight performance and flight duration a lot, compared to the 50mm version. I got around 6 minutes on a 700mah 1S battery. It doesn't feel that agile, but has more power to compensate for hard moves. I did some reinforcement at weak points. It can take some hits and is easy to fix using superglue if something goes wrong. Update: You may use my cam mount on your already printed frames. https://www.thingiverse.com/thing:2480571 Awesome flight controller firmware: Betaflight 3.1.6 Omnibus (Open Source) https://github.com/betaflight/betaflight Don't forget to break in your motors. (Around one lipo pack at min throttle, best way to do it is on the motors tab in betaflight configurator) Specs: Length: 120mm Width: 139mm Weight: 11.5 grams Build video: (Frame V1 but same hardware as in V2) (English subtitles) https://youtu.be/LPq8Mr7HCQQ In-flight footage: https://www.youtube.com/watch?v=NfufWjYw4Ik, https://www.youtube.com/watch?v=fMrqbYrJY9A, https://www.youtube.com/watch?v=PlmSJKTmD50, https://www.youtube.com/watch?v=Z-oIyA5sSoE, https://www.youtube.com/watch?v=Jz5RhfpFsBo Components: (Links to banggood.com) Flight control board: <a href="https://goo.gl/iPsMra">"Omnibus F3 with OSD and RX"</a> (Flysky/FrSky/DSM compatible versions available) Brushed motors: <a href="https://goo.gl/8DxBGM">"Racestar 8520"</a> Propeller: (Watch out, there are some flyaway props around. Can't recommend the cheap ones) <a href="https://goo.gl/CuWGpk">2 blade with 55mm diameter</a> FPV cam/transmitter combo - TX03 (Great image quality for its size, very lightweight) https://goo.gl/aqRcHs 1S 600mah 50C Battery With Charger (Higher C rate means more power for your quad) https://goo.gl/nd89mN 5V active Buzzer (Take it if you don't want to search your quad for hours and hours.) https://goo.gl/ud4U5G Further, you need: Transmitter of your choice. I use the Flysky I6 with SBUS mod https://goo.gl/GwRqK4 FPV goggle of your choice. I use the Kylin Vision with Eachine DVR mod https://goo.gl/1OyqmI Connectors you will need: (Links to banggood.com) 4x JST SH 1.0 - 2 Pin - pigtails or connectors for the motors ->https://goo.gl/72d5is 1x JST SH 1.0 - 4 Pin - pigtails or connectors for the FPV camera -> https://goo.gl/r3Vn92 Print Settings: Printer Brand: Printrbot Printer: Printrbot Plus Rafts: No Supports: No Resolution: 0.2 Infill: 100% More from 3D Printing view more