
Self-watering planter with indicator
thingiverse
Human: Transforms any ordinary container into a self-watering one! Now features an optional watering indicator to inform you when it needs to be refilled! Remix changes: * Adjustable in the [Customizer](https://www.thingiverse.com/thing:3786462/apps/customize) * Larger center pole with side perforation * 3 => 4 tertiary poles, now with center drainage * 4 top drain panels, with fewer, smaller holes for larger coverage * Pole stilts to allow complete separation from water * Watering attachment is now optional # DIY Watering indicator To use the watering indicator, print with the watering attachment hole enabled. **If you want to personalize your own, customize the [thing](https://www.thingiverse.com/thing:3792035)!** ### Parts * 1x plastic straw for boba tea (~11.6-11.7mm outer diameter) * 1x regular plastic straw * Scissors * Pliers * A lighter * A permanent marker ### Assembly 1. Print the water indicator (to prevent the straw from being touched). 2. Optionally print the end cap, if the bottom of the container is uneven or the inner straw catches. 3. Cut boba straw to depth of container, plus a little more. Add bottom cap. 4. Cut inner straw to same size (if you can't see the straw, time to water) or a little more (if you want two indicators). 5. While holding the inner straw end closed with pliers, lightly melt with flame of lighter. Give it a quick pinch with the pliers while still hot for a crimp seal. 6. Test fit the straws in the container and mark the maximum height the straw should float. 7. Assemble the rest together!
With this file you will be able to print Self-watering planter with indicator with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Self-watering planter with indicator.