Sega ST-V Multicart LCD Selector Enclosure.

thingiverse

This is an enclosure for the optional LCD Selector used on the Sega ST-V Titan Arcade Multi-Cart, designed to protect various PCBs in a sleek package. Print Settings I highly recommend printing buttons with a 10mm skirt, making installation easier as you can drop them all in as one unit and the flexible skirt won't cause problems pushing the buttons. No special settings are required to print this model. Post-Printing To assemble, start by removing the LCD section of the selector and placing the support block below it. This keeps the LCD section from flexing when pushing the buttons, giving a more solid feel. The small nub fits in the pcb hole nearest the buttons to prevent sliding around. Make sure all cables are plugged into the Selector before inserting the top edge of the assembly into the bottom housing first, ensuring the two-pin connector at the top goes into the hole before the bottom edge is pushed down. Insert buttons into the top part of the housing. If using a skirt, it should stay in place well; otherwise, flip the assembly upside down while putting halves together to prevent buttons from falling out. Make sure wires are all fed through the side opening and nothing is being pinched. Once assembled, insert four 30mm long M3 bolts from the top and gently tighten with downward pressure to cut threads into the bottom housing.