Sega Megadrive / Genesis Case for Odroid XU4 Fan or Blue Heatsink

thingiverse

This is a Megadrive case designed specifically for the Odroid XU4, featuring either a Blue Heat Sink or fan setup. To choose the correct upper part, determine your XU4 version first. The case was printed at 0.1mm layer thickness using PLA material. Required Print Settings: - Part_Up_BlueHeatsink.stl (or Part_Up_Fan.stl depending on your XU4 version) - Part_Down.stl - Cover_Emmc.stl - Two Feet.stl - Cartridge.stl - Button_OnOff.stl - Button_Volume.stl Required Print Settings (Grey): - Button_Reset.stl - Grey_Addon.stl Required Print Settings (Red): - Button_OnOff_RedLine.stl - Button_Volume_RedLine.stl - Grey_Addon_Light.stl Required Print Settings (Gold): - 16BIT.stl To add a more realistic touch, print the cartridge cover on a paper printer and glue it to the cartridge. Some parts, such as buttons, grey addon, feet, will require sanding to adjust their positions. Once sanded, glue them into place on the upper part. Next, insert four M3 screws to join the up and down parts. The positions for the M3 female holes are optional but can be used if desired. Finally, insert the EMMC cover into its position, and secure the feet in the screw holes to conceal them.