SeedSigner Open Pill Faceplates + Digital Cross + Joystick + Pad + Buttons

prusaprinters

<p>A set of faceplates, a digital cross, a joystick, and a pad for the popular SeedSigner (<a href="https://seedsigner.com/">https://seedsigner.com/</a>) Open Pill case.</p><p>Print the faceplates with the face down on the print bed. The pins match the bores of the WaveShare 1.3" 240x240 display HAT. They are designed with a 3mm diameter and should come out like this on a well-calibrated printer. Should have a tight fit. Confirmed to work on Prusa MK3s+ and Ender 3 V2 (with dual z-axis upgrade) with 0.4mm nozzle and 0.2mm layer height.</p><p>The digital cross is printed with the top side to the print bed. Print at reduced speed to get the diameter of the hole right. The hole is designed for 2.05 mm x 2.05 mm and should fit the 2mm stick on the WaveShare HAT. It may require some try-and-error with scaling or horizontal hole expansion settings to get a nice and tight fit. Confirmed on Prusa MK3s+ and Ender 3 V2 with 25mm/s.&nbsp;</p><p>The joysticks are printed with the top side to the print bed. Also print this at reduced speed, confirmed at 30 mm/s. Play with the Hole Horizontal Expansion in Cura in 0.01mm to 0.02 steps to get the fit right. In PrusaSlicer, try scaling the whole thing instead (really recommend Cura here!).&nbsp;</p><p>The diamond pad is a crossover between a joystick and the cross. While looking unusual, it works really well. It is printed with the bottom side to the print bed. Print with 30mm/s and use a low layer height, I've used 0.12mm and it has a nice touch. Set the wall printing order to inside-to-outside.</p><p>Print all models with 3 walls/perimeters.</p><p>Inspired by @blackcoffeebtc and @OrangeSurfBTC. The joystick is inspired by the original Orange Pill joystick and the antistabic joystick by @GoBrrr_me, <a href="https://www.printables.com/model/168238-antistabic-joystick-4-seedsigner">https://www.printables.com/model/168238-antistabic-joystick-4-seedsigner</a> .</p><p>Update May 18, 2022: Bigger buttons, slightly improved cross, and a low-profile stick.</p><p>Update July 5th, 2022: Extended the plates, modified the cross, added glue-on buttons.</p><p>Original open pill enclosure file can be obtained here: <a href="https://github.com/SeedSigner/seedsigner">https://github.com/SeedSigner/seedsigner</a></p><p>Also have a look at the protective shell: <a href="https://www.printables.com/model/208580">https://www.printables.com/model/208580</a></p>