SecretLab armrest spacers

prusaprinters

These spacers go in between the base of the chair and the armrests themselves. A friend of mine wanted his armrests lower, so that the chair could fit under his desk, so I made him some 25mm spacers.I figured somebody else might want a similar thing, so I made various thicknesses, as well as a test part that you can print to make sure that it will fit your chair.Tested on a 2018 omega model, as well as a new 2022 secretlab. Knowing that most gaming chairs are pretty much the same, this may fit many more chairs; try the test part first to make sure it will fit your particular chair.The stock bolts are 25mm long M8 x 1.25 SHCS, to use the 12mm spacer or the 25mm spacer, you will need longer bolts (35mm for the 12mm, and 50mm for the 25mm spacers) The 6mm spacer should work fine with the stock bolts..stl files included for 6mm, 12mm, and 25mm spacers, as well as some pre-sliced g-code for mk3s printers.Recommend .2 layer height, 3 vertical shells, aligned seams, and either rectilinear or honeycomb infill at least 15%