Seam Roller

prusaprinters

<p>This is a small roller I made to help with my wife's sewing. It can also be used for rolling the edges of wallpaper or anything you need to roll flat.</p> <p>The roller diameter is 20mm and 25mm wide. Overall length when assembled approximately 180mm (7 inches)</p> <p>The roller internal hole diameter is 5mm, the holes in the handle are slightly smaller to allow a bolt to thread into the plastic. A 5mm x 40mm bolt with nut should fit fine but two smaller bolts 10-15mm) without nuts can be fitted at each end instead if that makes it easier to source.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Tronxy x5s</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>35</p> <p><strong>Filament:</strong></p> <a href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=Surreal+PLA" target="_blank"> Surreal PLA </a> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Use at least 2mm walls (5 shells) and 2mm top and bottom for the handle and it should be plenty strong enough.</p> No supports needed for any parts. </div></p></p> Category: Hobby