Seal 3D Pro modular vertical grip.

prusaprinters

Since my 3d scanner came earlier than the grip, and holding it by the case is bit uncomfortable/inefficient, I've decided to quickly mash-up a grip for it.You'll need 4x m4x20 screws (,m4x25 will work too, the arm-adapter screws can be much longer, as there is lot of room left) and 2 or 4 pieces of m4 square nuts for grip and eventually for m4 adapter (I didn't embedded them in a print, it holds reasonably well.)After printing, follow these simple instructions:Get the print, scanner, bolts and nuts together, don't forget the scanner photo screw that was shipped with it: Insert m4 square nuts into left grip side, insert m4x25 (the shorter one) screws into other side. Insert the m4 adapter into one side of the grip (doesn't matter which one, just keep it there while assembling it together so it sits tightly): prepare the seal arm to be mounted correctly (pay attention to orientation of arm and grip - if you mount it the way it is on picture, you'll end up with usb-cable on top of scannerm if you rotate the arm - you'll end up with cable on bottom): Screw these two parts together, and enjoy your m4 seal 3d scanner grip: Thats it.  Edit: Added california gun-laws compliant version of the grip, commiefornians please use slightly longer grip-screws. Vote blue to preserve this in the future and make more completely sane and logical laws