scx10 6x6 HG p601 build

thingiverse

Here are some items I've made for my HG P601 body on a SCX10 6x6. I decided to build this for a winter rig to handle some trailing in the deep Alberta snow. It's running 2.2 cut mudslingers. I'm running 100mm shocks in the front for increased articulation and then 90mm in the back with a 10mm lift kit. RC is running a 3300kv brushless system with a 3660 can motor size. All steel gear transmission and all steel driveshafts are used. The grill has two versions, one screw-on and another glue-on. The headlights take 5mm LED lights and you can glue in clear lenses that come from round LED pods. A panhard bar and servo mount are included. Mount screws go behind the shock on axles, the P601 axles. And a panhard mount needs to be screwed through the frame. For the panhard bar, I had to put a bend in so it would clear the front output shaft. The receiver box has a mount to mount onto the side of the frame and then the receiver box mount on top of the mount using M3 bolts and M2 bolts to hold down the lid. If you silicone inside the lid before putting it on, it will be waterproof. If you're doing one of these builds, I recommend searching P601 - lots of great items come up.