SCX-10 Cantilever Suspension (Mini E-Revo Shocks)
pinshape
Print out one of each file. You'll need a variety of hardware and mini E-Revo Springs ($14 on eBay for 4) to complete the kit. Hardware: 4 - 12x2.5mm, 2 - 14x3mm, 2 - 10x3mm, 2 - 35x3mm, 2 - 3mm Lock Nut, 4 x Rod Ends (Traxxas or Axial will do), A length of 3mm all-thread, a cut 3m bolt, and a long set screw that will be cut to length for the desired ride height. Rod Ends (TRAXXAS Model #2742 - Rod ends, long (6)/ hollow ball connectors (6)) The pivot of the Lever needs to be drilled out to 3mm for smooth operation. The rear Bumper mount post must be trimmed in length to fit. The hold is 11mm deep. The lower Link Spacers are designed to replace the aluminum spacers seen in the photo, making installation easier.
With this file you will be able to print SCX-10 Cantilever Suspension (Mini E-Revo Shocks) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SCX-10 Cantilever Suspension (Mini E-Revo Shocks).