SCULPFUN S30 Adjustable feet
cults3d
Stand attachment for SCULPFUN S30. Height quickly adjustable from: +0mm to +50mm ( for a possible engraving at 120mm ) Clean the inside of each part properly to ensure a snug fit. Try to fit the 'pin' inside its hole (02.jpg) , feel free to adjust the hole with a 5.5mm drill bit. The 'pin' must not protrude Deburr the base of all S30-Feet ( adjustments between S30-Feet and S30-Base are small to avoid vibrations during cutting ) Present each S30-Feet in its S30-Base, pass an M5 20mm screw through each of the holes. If you have difficulty, use a 5.5mm drill bit. Before attaching the S30-Bases, check the squareness of the laser cutter. Pass the M5 20mm screws to secure the legs in the down position while you fix them to the board. Use 3.5 x 25mm Screws to secure the S30-Base to the board.
With this file you will be able to print SCULPFUN S30 Adjustable feet with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SCULPFUN S30 Adjustable feet.