Scroll capsule

prusaprinters

<p>Edit, I have also created a dispenser for these: <a href="https://www.thingiverse.com/thing:3096574">https://www.thingiverse.com/thing:3096574</a></p> <p>I wanted to give a friend some motivational notes, so any time they need an emotional boost, they can take one, crack it open and reveal the pre-written message.</p> <p>It works like a fortune cookie, and I have designed it to be sealed, but still weak enough that it can be opened by hand.</p> <p>I recommend printing it at 0.2mm layer height, with a 0.4mm nozzle.</p> <p>Enable thin wall detection and I would recommend a brim for stability.</p> <p>The message can be 60mm high, and as long as it can be rolled into a roll less than 7mm diameter, it will fit.</p> <p>For printing, I used M600 to change the colours a few times on my Prusa mk3, and added the scrolls while it was paused - but I have also printed a few at a time, spaced in a line - then used speed and dexterity to insert the scrolls while it was printing. Depending on your printer, you may be able to pause as well.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Notes:</strong></p> <p>Use a brim, as they are tall and narrow and you want to make sure they keep good bed adhesion while printing.</p> </p></p></p> Category: Interactive Art