Screw & Parts Tray

prusaprinters

<p>Simple set of screw and parts tray I have been using while working on some of my electronics projects. The download sections include 2 folders to differentiate them as their dimensions are different:</p><ul><li><i>parts-tray</i>: models are 16 mm high with pockets based on a 30 mm × 30 mm grid</li><li><i>screw-tray</i>: smaller 12 mm high models with 23 mm × 23 mm pockets</li></ul><p>I have included two variants of each type: <i>large</i> variants includes a larger merged pockets with a central bigger one while the <i>small</i> variants mostly keeps to their grid setup with some merged pockets as it can be frustrating when one component do not fit your grid.</p><p>If you need a different setup than the one I provided, you can check out each Fusion 360 source files where the grid is relatively well-defined as a sketch. I may also add new ones here if I ever need to print new ones or someone asks for something I can do quickly in the comments.</p><h4>Printing</h4><p>The model should be printed with the underside on the build-plate and can be printed relatively quickly and cleanly using 0.3 mm layer height and 20% infill.</p><ul><li>Raft: no</li><li>Supports: yes</li><li>Layer Height: 0.3mm</li><li>Infill: 20%</li></ul>