Screw and Nut set M5/M10
prusaprinters
A set for scaling tests.Neither M5 nor M10 screw/nut set won't fit when printed at 100% !!!Created specifically to test scaling of the set on your printer.M5 - from my tests works best when screw at 100% and nut at 105% (X and Y axis only!!!) OR nut at 100% and screw at 95% (again X and Y axis only!!!)M10 - from my test works best when screw at 100% and nut at 103% (X and Y axis only!!!) OR nut at 100% and screw at 97% (X and Y axis only!!!)Tested in PLA and ASA on Prusa MK4.Test prints should work fine with just 20% infill. End print should have more infill and if the screw actually should bear any load it should probably be 100% infill for best layer adhesion.
With this file you will be able to print Screw and Nut set M5/M10 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Screw and Nut set M5/M10.