Scratching post wall brackets
prusaprinters
<p>This design is loosely based on RafaelEstevam's customizable screw/nut clip (https://www.thingiverse.com/thing:1125726). It is intended to mount a tube, like a cardboard shipping tube, to the wall for use as a cat scratching post.</p><p>Print 2 brackets, and mount each to the wall with two screws apiece. Insert threaded rods through the bracket arm holes and through holes you drill through the cardboard tube. Secure the rods to the brackets with nuts & washers. I think I wound up using leftover Ikea hardware from...something.</p><p>Use a high infill setting for strength, because these brackets need to hold the weight of the tube covered in sisal rope, plus the cat!</p><h3>Print Settings</h3><p><strong>Printer Brand: </strong>SeeMeCNC</p><p><strong>Printer: </strong>Rostock MAX v2</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Filament: </strong>PETG recommended<br/> </p><p>Category: Pets</p>
With this file you will be able to print Scratching post wall brackets with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Scratching post wall brackets.