SCRAT AND HIS FAMOUS ACORN SUPPORT KEYS
cults3d
GREAT KEY HOOKS First of all test the whole without gluing. You may have to give small blows of abrasive paper if you have problems of deformation or exaggerated rubbing or burrs depending on the quality of your printer. The whole thing fits with the 4 wall mounts. The assembly is intuitive. Assembly of the 2 bottoms with the rack, the eye and its pupil, the tail and the gear inside. (you have a diagram explaining the starting positions of the parts. (.jpg pinion assembly)) Glue the pupil in his eye. Glue the teeth with the body. Glue the nose with the body. Glue the body on the bottom-2. (without putting glue in the areas of the spikes for disassembly) Glue the arm and the leg on the body. (without putting glue in the areas of the pins for disassembly) Do not glue the tassel to its stake. (the force fit is enough to be able to disassemble the whole system if it is necessary to intervene) For a good balance of the masses: Be careful that the entire acorn does not exceed 10 grams (playing with the filling) The bunch of keys will have to weigh at least 90 grams to maneuver and reassemble the acorn. For PLA, CYANOLITE or PVC glue works well. Good printing
With this file you will be able to print SCRAT AND HIS FAMOUS ACORN SUPPORT KEYS with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on SCRAT AND HIS FAMOUS ACORN SUPPORT KEYS.