Scraper with 60 mm trapezoid blade

prusaprinters

<p>The original handle of my scraper was not holding the blade, while I was removing a sticker, so I created more secure handle.</p><p>The blade can be easily pressed into the handle and sits firmly without play. From above the blade is secured by holder - M3 screw and nut are required to connect both parts. The cover snap in and secures the blade, when not used.</p><p><br>Approximate dimensions of the blade:</p><ul><li>length: 60 mmm,</li><li>width: 18.7 mm,</li><li>thickness: 0.65 mm.</li></ul><p><br>Required for assembly:</p><ul><li>1 x imbus screw M3 x 6 mm,</li><li>1 x hexagon nut M3.</li></ul><p>&nbsp;</p><p>Print settings:</p><ul><li>Layer height: 0.2 mm,</li><li>Perimeters: 3,</li><li>Solid layers - top/bottom: 5 / 5,</li><li>Supports: No *).</li></ul><p>&nbsp;</p><p>There is additional file "bladeinterface" - it enables quick check if the blade will fit into the handle.&nbsp;</p><p>I printed my handle with PLA, but PETG should work too - for first checks of blade interface dimensions I used already PETG and result was fitting well.&nbsp;</p><p>*) Actually in final version of blade holder I used support in screw hole, to get better surface.</p>