
scissors wallmount stand ножничный кронштейн
thingiverse
You get a rod diameter of 10 mm and 135 mm long. Countersunk head screw; M3 x 8 mm x 2 and wide spacer M5 x 1. One round magnet with a diameter of 12 mm, a thickness of 4 mm, and a hole diameter of 4mm for screw M3. You will need one magnet. One iron plate is 40x40 mm and some 3M adhesive tape. You can see more strong things like this here: https://www.thingiverse.com/thing:4172766 The scissors hole 3 STL file and the scissors thread 3 STL file are a pair. Each pair gives 70-80 mm of distance at normal use and up to 95 mm of distance at extreme traction. At traction more than 80 mm, it slightly bends to the side under the weight of the device. Print a nut for each printed thread. Print two wallmount STL files and one cap STL file. Print one scissors thread 2 STL file and two nut STL files. Print one slider hole STL file. Print one slider thread STL file and one nut STL file. Print one magnet stand STL file. Print one Scissors hole end STL file. You will need as many pairs of the scissors hole 3 STL file and the scissors thread 3 STL file as you want, and three nut STL files for each pair.
With this file you will be able to print scissors wallmount stand ножничный кронштейн with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on scissors wallmount stand ножничный кронштейн.