Sci-Fi Lamp Shade 3D print model

cgtrader

A unique lamp shade awaits all tech enthusiasts, geeks, and Star Wars fans! For those who love 3D printing too! All test printing was done using the following system: MacBook Pro, 16GB RAM, Intel Core i7 2.9Ghz, Simplify3D. Carefully read these tips: If your build volume is below 30cm on the z axis, you'll have to print the split version. My personal print settings are as follows: Layer height of 0.16mm (0.2mm is fine too and much quicker) 5% infill 10 bottom layers 10 top layers 2 outlines 35 - 40mm/s print speed Z-Offset: -1mm (for a flat surface) Printing time will take several days, depending on your machine and settings. Printing it hollow drastically cuts printing time. Recommended material: PLA, black matte. Supports: Use supports for the top hole if you need to. If adhesion is great, try printing with the small hole facing down like I did. Some structures will sag but that's not a problem since this whole print looks grungy. I didn't use any supports at all. For lighting, I used the Philips Hue system. The cord is this one: https://amzn.to/2E4zAbN (Affiliate Link from Germany). Just get E27 for the fitting or try what you need in your country. Contact me if you need adjustments on the top hole. If you have problems printing this or just want to make suggestions, don't hesitate to contact me. You can also reach out via email to blenderkoch@gmail.com. Note: This file is for personal use only. If you want to use it commercially, just contact me and we'll find a fair solution!