Satsana with Back Support (Ender 3 V2)
thingiverse
Remixed the Ender 3 V2 Satsana to include a support on the back that latches onto the stock hot end plate. This remix prints just like the OG with no supports. There are two options: 1. Satsana w Back Support (No Nuts) - This requires 3 additional M3 screws that are 10 mm long (M3x10) 2. Satsana w Back Support (M3 Nuts) - This requires 3 additional M3x10mm screws and 3 M3 nuts that fit into nut slots. Make sure that your nuts are less than 6mm wide and 3 mm long. PRINTING: 0.2 mm layer height with 25 % infill. Make sure that you don't have much elephant's foot or the screws won't fit! Print each component in the given orientations; they should not require any supports. ASSEMBLY: Follow the same assembly procedure as in the original Satsana (https://www.thingiverse.com/thing:4369859) but at the end make sure to add the back support piece and their respective nuts/screws.
With this file you will be able to print Satsana with Back Support (Ender 3 V2) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Satsana with Back Support (Ender 3 V2).