Satsana Ender 3 V2 5015 + BlTouch

thingiverse

<strong> Update: 1. The fan duct fits perfectly and accomplishes what I'd set it out to do, provide a flush fit for the 5015 into the duct. 2. The BLTouch ribbon is on the right side with no way of going onto the left. 3. The X endstop is triggered normally by the gantry and not by the duct. 4. The 5015 screw holes are a bit hit or miss, I didn't have any screws to mount it properly so I used zip ties. 5. The picture is the exact same file with the added symbols of the mythosaur skull on the front and the mudhorn one on the 5015 mount hole. </strong> <strong>This is currently a work in progress as I'm just now printing it, I'll update if there's any problems.</strong> This is a remix of multiple satsana ducts as well as using features taken from other ducts (Petsfang blokhead 5015 mounting slot) featuring the 5015 version with bltouch. My biggest problem with the available remixes was the fact that no matter how hard I tried I couldn't get my 5015 blower fan to properly fit the provided blower slot. My other problem was that some of the gantry holes were either present or missing on different versions. Take the hole where the roller usually goes in on the left side, I just like the extra stability it provides. The X and Y offsets for the bltouch should be the ones from https://www.thingiverse.com/thing:4637453 specifically : X-46 Y-8. While doing my probe calibration the results were actually -47 and -7 . This satsana is using mixed parts from: https://www.thingiverse.com/thing:4647053 https://www.thingiverse.com/thing:4637453 https://www.thingiverse.com/thing:4369859 https://www.thingiverse.com/thing:2759439