Satsana dual 5015 direct drive x-axis drag chain mount

thingiverse

This is a remix of a direct drive mod combined with a connector for an x-axis drag chain. I also had to make it a bit taller to accommodate the dual 5015 Satsana hotend shroud that I use. [Original Direct Drive mount](https://www.thingiverse.com/thing:4378087) [X-axis Drag Chain](https://www.thingiverse.com/thing:3715002) [Satsana Dual 5015 Fan Duct w/ BLTouch](https://www.thingiverse.com/thing:4697079) **Update March 6, 2021 (already):** After the initial print, I realized that I had made this a bit taller than it needed to be, and that the drag chain did not line up properly. I also noticed that the threaded hole for mounting the hotend assembly that bumps out and meets with the mount was not aligned with the hole in the [Original Direct Drive mount](https://www.thingiverse.com/thing:4378087) that I had based this on. Rather than completely redesign the chamfered bits on the back to move the hole, I just made a big channel to cover up the old hole and widen the space to accommodate the proper space for the threaded hole. Reuploaded the new version and removed the old file. **Update March 10, 2021:** Realized where the drag chain connects on the hotend part interfered with the left side vertical extrusion and prevented the hotend assembly from hitting the x-axis endstop to home. Moved it just far enough along the x axis to hit the endstop while not then hitting the opposite vertical extrusion.