Satsana dual 5015 direct drive x-axis drag chain mount

prusaprinters

This is a remix of a direct drive mod combined with a connector for an x-axis drag chain. I also had to make it a bit taller to accommodate the dual 5015 Satsana hotend shroud that I use. Original Direct Drive mount X-axis Drag Chain Satsana Dual 5015 Fan Duct w/ BLTouch Update March 6, 2021 (already): After the initial print, I realized that I had made this a bit taller than it needed to be, and that the drag chain did not line up properly. I also noticed that the threaded hole for mounting the hotend assembly that bumps out and meets with the mount was not aligned with the hole in the Original Direct Drive mount that I had based this on. Rather than completely redesign the chamfered bits on the back to move the hole, I just made a big channel to cover up the old hole and widen the space to accommodate the proper space for the threaded hole. Reuploaded the new version and removed the old file. Update March 10, 2021: Realized where the drag chain connects on the hotend part interfered with the left side vertical extrusion and prevented the hotend assembly from hitting the x-axis endstop to home. Moved it just far enough along the x axis to hit the endstop while not then hitting the opposite vertical extrusion. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: Overature Eco-PLA Black Notes: I tend to remove supports for all the circular holes, and I prefer tree supports, but that's up to you. I printed it standing in it's final orientation, but you may be able to figure out a way that requires less supports overall if you flip it around in some other direction. Category: 3D Printing