Satellite Mount to 1" Conduit Adapter

thingiverse

After moving into my home, I decided to become an Amateur Radio operator. Since we don't have DirecTV service, the old dishes and mounts were of no use to us. One was used as is to mount a regular TV antenna. Now that the second one has been sitting in the garage for two years, waiting for a 3D printer, I finally got around to creating a mast for an antenna/weather station. You don't have to print all three parts. You can print just the adapter and drill guide separately. You also don't need the drill guide if you're skilled enough or have a drill press with a vice. The bolt holes are 75mm apart. Items needed: Old DirecTV Dish Mount. Five foot one inch Galvanized steel conduit Two 2.5 inch 1/4-20 bolts (stainless preferred) Two 1/4-20 Nyloc nuts Two M4*10 Stainless screws