Sapphire Pro E3DV6 Simple Mount

thingiverse

Here's a simple mount to secure an E3DV6 hotend to the Two Trees Sapphire Pro carriage, designed for newer versions with two mounting holes higher up and one lower down. The bracket attaches to the carriage has oblong holes allowing slight vertical position adjustments. Small zip ties fasten the front of the mount to the front holes of the carriage. To assemble, you'll need 2x M3 heat set inserts and 2x M3 20mm bolts for the clamp. The bolts pass through all three pieces from the rear of the bracket. This clamp only secures the heat sink to the carriage; a separate component is still needed to hold the heat sink and part cooling fans in place.