Sapphire plus X axis mounts for 2020 extrusion

thingiverse

I was having issues with my X rail support. The support was bowed, this might have been caused by the distance between the y rails was shorter that the length of the x support. Also the screws that hold the idlers on the X axis rail support fell out. Decided to replace it with a 2020 aluminium extrusion which was at 180g and the current support was at 263grams. Added step file so you can customize to you needs. Things you will need: * 2020 370mm aluminium extrusion X1 * M3x8mm x16 * M3 t-nuts X16 * M4x12mm x2 * M5x30mm x2 connect to x axis mount and the aluminum extrusion. This will all you to adjust the length. * M5 X 40mm (DIN 912): Cut to a length of : * 30mm x2 * 25mm x2 The idlers will sit on the non threaded part of the bolt * m5 nuts x 4 * F695-2RS - 5 x 13 x 4 mm x8 You will also need to print the X and Y nema 17 mounts found here https://www.thingiverse.com/thing:4797661. Please note that the names are not correct. x is y and y is x. Read the comments.