Sanwa JLF TP-8YT-SK Bullet Top with Thread

prusaprinters

Designed based on the Seimitsu LSX-NOBI-01-STD lever top, threaded for Sanwa JLF TP-8YT-SK. Ever wanted to try a different top on your Sanwa lever, but don't want to pay for shipping since you're unsure if you'd like it? Try printing this first! The thread works great with my Sanwa JLF TP-8YT-SK lever. Due to the nature of the material, these won't hold up of you ride the gate a lot when you play (or if you rage and abuse the stick a lot.). For standard play, these should hold up nicely. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 40 Filament: eSun PLA+ White Notes: PRE-REQUISITE FOR EXACT PRINT SETTINGS: * Install the "Custom Supports" version 0.1.0 mod by Krasimir Stefanov on the Cura Marketplace. * The Cura version used for this print of mine is version 4.10.0 Printer model: Ender 3 V2 Filament: eSun PLA+ Filament Color: Fire Engine Red Layer Height: 0.2mm Initial Layer Height: 0.2mm Line Width: 0.4mm Wall Thickness: 0.8mm (lighter duty) OR Wall Line Count: 8 (heavier duty) Top/Bottom Thickness: 0.8mm Top Thickness: 0.8mm Top Layers: 4 Bottom Thickness: 0.8mm Bottom Layers: 4 Enable Ironing: YES Infill Density: 40% Infill Pattern: Zig Zag Printing Temperature: 205C Printing Temperature Initial Layer: 205C Build Plate Temperature: 60C Build Plate Temperature Initial Layer: 60C Flow: 100% Initial Layer Flow: 100% Printer Speed: 72 mm/s Infill Speed: 72 mm/s Outer Wall Speed: 36 mm/s Inner Wall Speed: 55 mm/s Top/Bottom Speed: 55 mm/s Support Speed: 36 mm/s Travel Speed: 180 mm/s Initial Layer Speed: 20 mm/s Enable Retraction: YES Retraction Distance: 6.0 mm Retraction Speed 45 mm/s Enable Print Cooling: YES Fan Speed: 100% Generate Support: NO (I use a plugin called "Custom Supports" by Krasimir Stefanov, available on the Cura Marketplace. Please research on how to use that beforehand.) Support Pattern: Grid Support Density: 40% Enable Support Brim: YES Enable Support Interface: YES Build Plate Adhesion Type: Raft Raft Extra Margin: 15 mm Raft Smoothing: 5mm Raft Air Gap: 0.3mm Raft Top Layers 2 Raft Top Layer Thickness: 0.2mm Raft Top Line Width: 0.4mm Raft Top Spacing: 0.4mm Raft Middle Thickness: 0.3mm Raft Middle Line Width: 0.8mm Raft Middle Spacing 1.0mm Raft Base Thickness: 0.24mm Raft Base Line Width: 0.8mm Raft Print Speed: 36.0mm Category: Video Games