Sand Sieve Toy

prusaprinters

<p>If you use the stl file:</p><ol><li>Split the object into parts</li><li>Set the solid layers top/bottom of the bottom plate to 0</li><li>I used honeycomb infill at 30% which results in close to 2mm holes. I tested with 40% (approx. 1.2mm) which also prints well.</li></ol><p>I used 4 perimeters and the print holds up well so far.</p><p>The model should scale well between 30% and 200% although you might want to reduce the thickness of the bottom plate at larger sizes.</p>