Samsung S6 QI Car Dock

thingiverse

Print the large flat side of your print bed with one piece. There are some small chamfered overhangs and bridges in this print. Snap fits worked perfectly on my printer, but snap fits have high tolerance. You may need to adjust your post processing or file for a better fit. You will also need: A suction base from a generic car holder with 4 claw type connections. Check the photos attached. The suction base I used is stiffer than the swan neck I used before. http://www.amazon.co.uk/gp/product/B00H3G8858?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 A QI charging base with a diameter of 70mm and a thickness of 10mm is also required. https://www.amazon.co.uk/Nestling%C2%AE-Compatible-Blackberry-SlimPWRcard-Qi-enabled/dp/B011AX6UC2/ref=pd_day0_hl_107_1?_encoding=UTF8&pd_rd_i=B011AX6UC2&pd_rd_r=51cd2407-ea97-11e8-bada-05ff91afe9a8&pd_rd_w=YxEQd&pd_rd_wg=bDN3e&pf_rd_i=desktop-dp-sims&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_p=b082d07b-aaea-4f40-9ff3-d27463f747d7&pf_rd_r=55HJNNFQCS2T30TGZSRB&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=55HJNNFQCS2T30TGZSRB A Solidworks 2018 file is included if you want to create a new version for a newer phone.