Samsung Galaxy Z Fold 2 Case

prusaprinters

<p>This is a case I designed for the Samsung Galaxy Z Fold 2. You are free to tweak and change the model as you like (Fusion 360 project file is included) - I only ask that you also upload any changes as a remix so we can all benefit from it. And of course, follow the CC license I have specified.</p> <p>After lots of tweaking and tens of printed prototypes, I've finally arrived at an iteration that I'm satisfied with. I would recommend some 3M adhesive on the inside of the case (especially for the top case as it tends to slide out), but otherwise, it fits really well.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Mk2.5s</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10%</p></div> <p><strong>Filament:</strong> Any PLA/PETG/ABS/TPU Any</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>In the photos I've uploaded, I printed the case using clear PLA at 0.2mm (0.4mm nozzle), 2 perimeters, with 10% hexagon infill, but I would recommend PETG or ABS to avoid deformations over time.<br/> TPU is printable, but it's a bit loose due to the flexible material - you would definitely have to apply some double-sided adhesive, especially for the front case. <p>When slicing, orient the pieces as per the 2nd picture, laying flat on the bed.</p> </p></div></p></p></p> Category: Mobile Phone