Samsung Galaxy Tab Shelf Mount

prusaprinters

<p>Designed to mount to a utility shelf.</p> <p>All parts printed @ 2mm w/ 3 perimeters, 15% infill except for the two small hanging posts which, for strength, were printed @ 1.5 w/ 4 perimeters and 40% infill.</p> <p>The ball and nut parts print together. Supports required.</p> <p>All connecting parts thread together. The hanging posts are designed to not bottom out so you can adjust for the thickness of your shelf allowing for a snug fit when hanging the mount. Be careful not to over-tighten the threaded bits.</p> <p>Hanging posts are 36.5mm apart.</p> <h3>Print Settings</h3> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>.15 - .2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>15</p></div> </p></p> Category: 3D Printing