Samsung Galaxy S5 Stand (Magnetic Charger)

thingiverse

++ There is an updated version available ++\r\n++ V2 can be found here: https://www.thingiverse.com/thing:3537445 ++\r\n\r\nFrom the previous version(https://www.thingiverse.com/thing:3384918): \r\n\r\n"Smartphone stand for magnetic charger\r\n\r\nThis design is based on a previous one (https://www.thingiverse.com/thing:3376737), but it features an attachment for a magnetic charging cable.\r\nThe idea behind this is that once you place your phone in the stand, it will start charging automatically without requiring a separate plug-in. This requires that the USB adapter remains permanently attached to your phone's micro USB port. The one I use is extremely small and can be easily carried with my phone attached to my pocket without any issues.\r\nI use this: https://www.amazon.de/gp/product/B06XQZMHMT\r\n\r\nThis design is intended for use with my Samsung Galaxy S5 Neo, but it should work with any other smartphone that does not exceed 10 mm in thickness and 72 mm in width, with the USB port positioned centrally.\r\n\r\nThe design consists of two parts, both of which can be printed without support material. If you plan to use a different charging connector, you may need to adjust the charger mount accordingly.\r\nThere is a 0.2 mm tolerance between the two parts, which ensures they hold together securely without requiring any additional attachment."\r\n\r\nChanges Made :\r\n- A thread and screw were added to secure the cable in place.\r\n- Some basic alterations were made to enhance stability.\r\n- The design was reduced in height and wall thickness, resulting in a faster print time.\r\n- The overall volume of the design was minimized.\r\n\r\nThis updated version works perfectly for me, and I'm likely to leave it as is. It feels great to head out with a 100% charged phone :)\r\n\r\nDesigned using SolidWorks, sliced with Cura, and printed with the Anet A8 without any support material.