Samsung Galaxy J7 Prime / On7 Prime g610 case

prusaprinters

<p>Originally posted on Thingiverse here: <a href="www.thingiverse.com/thing:2825299">www.thingiverse.com/thing:2825299</a></p><p>This case is for the phone Samsung Galaxy J7 Prime, that is g610 models; do not confuse with the <a href="https://www.prusaprinters.org/prints/57319">J7 2016, j710</a> models.<br>Some of the models are designed for rigid materials and others for flexible ones.<strong>The models materials are not interchangeable</strong>, so pay attention to the file names. If you have any request on the design just ask me.<br>The model for holding a pen was suggested by <a href="ww.thingiverse.com/PoetsEspresso/about">PoetsEspresso</a>.<br>This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.<br>Por el día de la independencia argentina, el 9 de Julio, voy a actualizar algunas de las carcasas para celulares con una versión que haga alusión a la bandera argentina. Por la finura de algunas partes, este diseño sólo es posible en celulares relativamente grandes.<br>For other phone cases check <a href="https://www.prusaprinters.org/social/120859-tato_713/collections/48429">this</a>.<br>Here is the explanation of the files names:</p><ul><li><strong>Flex:</strong> made for elastic filaments like TPU. Tested on TPU.</li><li><strong>Rigid:</strong> made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.</li><li><strong>Aired:</strong> It is widely opened in the back so that the phone can dissipate the heat easily.</li><li><strong>WG:</strong> suggested for white and gold models. It's better to print it in darker colours to make contrast.</li><li><strong>B:</strong> suggested for black (dark gray) models. It's better to print it with light or transparent filaments.</li></ul><h3>Print Settings</h3><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Notes:</strong></p><p>If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.</p>