Samsung Galaxy J2 Prime / Ace g532 case

prusaprinters

<p>Originally posted on Thingiverse here: <a href="https://www.thingiverse.com/thing:2901483">https://www.thingiverse.com/thing:2901483</a></p><p>Some of the models are designed for rigid materials and others for flexible ones.<strong>The models materials are not interchangeable</strong>, so pay attention to the file names. If you have any request on the design just ask me.<br>The Peridot model was designed for being printer with different colors per layer: the first two layers of 0.3mm (or three layer of 0.2mm) must be white; the next two layer black, then dark blue (or gray), then yellow, then green, and finally the color you want the rest of the case. It must be printed in flexible filaments, and may be needed support. The firsts layers can be printed with PLA, but it is recommended to reinforce them with glue after printing. This design was never tested because the phone it was designed for was stolen.<br>This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.<br>Por el día de la independencia argentina, el 9 de Julio, voy a actualizar algunas de las carcasas para celulares con una versión que haga alusión a la bandera argentina. Por la finura de algunas partes, este diseño sólo es posible en celulares relativamente grandes.<br>For other phone cases check <a href="https://www.prusaprinters.org/tato_713/collections/phone-and-akin-cases">this</a>.<br>Here is the explanation of the files names:</p><ul><li><strong>Flex:</strong> made for elastic filaments like TPU. Tested on TPU.</li><li><strong>Rigid:</strong> made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.</li></ul><h3>Print Settings</h3><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Notes:</strong></p><p>If you set the wall width to one filament line (0.4mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.</p>