Samsung Galaxy A02s, A03, A03s, A03 Core, F02s & M02s case

prusaprinters

<p>Originally published here: <a href="https://www.thingiverse.com/thing:4826279">Samsung Galaxy A02s &amp; F02s &amp; M02s case by tato_713 - Thingiverse</a></p><p>This case was made for the phone A02s and M02s (a025 and m025 models); for the A02 or M02 case (a022 and m022 models) see <a href="https://www.printables.com/model/65084-samsung-galaxy-a02-a03-a03s-a03-core-a12-f12-m02-m">this post</a>. It is inferred that this case is compatible with the M02s and F02s models, albeit not tested. This case may be compatible with the phone Samsung Galaxy M51 (m515), if you test it with this phone, please let me know. Some of the models are designed for rigid materials and others for flexible ones. <strong>The models materials are not interchangeable</strong>, so pay attention to the file names. If you have any request on the design just ask me.</p><p>For other phone cases check <a href="https://www.printables.com/social/120859-tato_713/collections/48429">this</a>.</p><p>I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me by <a href="https://www.paypal.com/donate?token=Vs2In7MOO1j3F3ADS858-hZWS3wOL6ebfWXIdzdoOOEZ1cUxa2oRlM9H9kgUT_dfml4aLaLfL32ZgvTv">donating to this PayPal account</a>.</p><p>Here is the explanation of the files names:</p><ul><li><strong>Flex:</strong> made for elastic filaments like TPU. Not tested.</li><li><strong>Rigid:</strong> made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.&nbsp;</li><li><strong>Aired:</strong> It is widely opened in the back so that the phone can dissipate the heat easily.&nbsp;</li><li><strong>Banded:</strong> It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip.</li></ul><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p>0.3</p><p><strong>Notes:</strong></p><p>If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.</p>