Salt shaker refill funnel

prusaprinters

<p>Small funnel designed specifically to refill 250g salt shakers with the rotating cap as shown in the picture. Prints fast, requires very little filament and helps save a few pennies by refilling the salt shaker quickly and easily.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2 mm</p> <p><strong>Filament:</strong></p> Generic PETG <p>Transparent</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Preferrably to be printed with a food safe filament: I used transparent PETG.</p> Designed to be printed in vase mode (Cura: "Spiralize outer contour") with 0 bottom layers and the rectangular base touching the buildplate. The sliced result should be as shown. <p>Using a brim is absolutely recommended. The brim can be left in place after printing as it becomes a place to hold the funnel when pouring in new salt. Prints in less than 30 minutes with a 0.4mm nozzle and 0.2mm layer height, and hardly uses any material. At these print settings it is quite delicate, so maybe I suggest using a 0.6mm nozzle and 0.3mm layer height.</p> <p>The model is weirdly oriented because I started from a 2D scan of the salt shaker cap to start designing the funnel, so that dimensions would be accurate.</p> </div></p></p> Category: Kitchen & Dining