Salanki VR gunstock simplified version

thingiverse

ChangesChanged Stock tube to fully printed to reduce weight, applied a 15 degree slant on the tube body to strengthen the Z-axis.Added a piece of printed magnet support inside the magnet cup to adapt smaller magnets.Modified the muzzle piece to make it easier to print and harder to break, also reducing overall length a tiny bit.Flattened the designs on the main body for an easier print, removed the unnecessary sight mount on top of the body.Added more lines onto the buttstock plate for more friction when shouldering the gunstockEdit 13/11/2023Added an extra groove on the back end of stock tube for easier assembly when putting on/taking off the stock, now it can slide right off the back when handle is pressedHOW TO PRINTPrint the buttstock parts as is, pretty obvious which side to print on.Print the muzzle with the front side touching the build plate (the flat side).Print the stock tube with the rear side on the build plate (the side closest to your sholder) the tube should be slanted when placed correctly.Print the main body with the rear square side on the build plate. you may want to use a brim due to small surface area on the build plate.You might want an 4 layer wall due to the thinner body, also use 35%-50% infill.No supports are needed for all parts.NON-PRINTED PARTSM3x40mm caphead for buttstock lever0.5x6x20mm spring for buttstock leverM3 nut for buttstock lever2x M3x5mm caphead for buttstock cusion2x M4x18mm wood screw for controller mounts2x Thin one-sided rubber sticker for controller mounts1/2’’ 400mm steel pipe for barrelMagnets28 x 5mm 55 LB Force pot magnet for left hand mounthttps://www.amazon.co.uk/dp/B07Q5R1ZLJ?psc=1&ref=ppx_yo2ov_dt_b_product_details32 x 8mm 44 kg Force pot magnet for right hand mounthttps://www.first4magnets.com/countersunk-c41/32mm-dia-x-8mm-thick-x-5-5mm-c-sink-n42-neodymium-pot-magnet-44kg-pull-p3478#ps_0_3568|ps_1_1557Countersunk hole size for both magnets can vary from 4 - 5.5mmQD Sling Mounts are available on both buttstock and main body