Saddle tab adapter

prusaprinters

<p>An adapter for adding tabs to non-tabbed saddles - to enable the use of more traditional saddle bags.</p> <p>These tabs are present on many leather saddles by default.</p> <p>There are two versions of the mount: a 3D printed version &amp; a Machined version. The 3D printed version has more material to cope with its weaknesses - I would only put very light, small bags on it.</p> <p>Hardware required:</p> <ul> <li>2 M5 x 25 mm bolts: longer depending on your saddle rail diameter, which is probably standard</li> <li>2 M5 locknuts, 5.2 mm width, 8 mm height</li> </ul> <p>Thanks to Timo Wories over at GrabCAD for the wonderful saddle model (<a href="https://grabcad.com/library/vnt-saddle-1">https://grabcad.com/library/vnt-saddle-1</a>).</p> <p>Also inspired by the Hobo Restuvus mount (<a href="http://www.hobopieces.com/product/the-restuvus">http://www.hobopieces.com/product/the-restuvus</a>). Pictures of that one are included above for reference.</p> <p>The slot width, diameter, &amp; spacing were referenced from a Velo Orange leather saddle I have.</p> Category: DIY