Sabre 3D Printed Wing Parts

thingiverse

# Sabre 3D printed plane parts ## Original plane design can be found [here](https://www.rcgroups.com/forums/showthread.php?4223695-Rifter-and-Sabre-mini-sized-FPV-cruisers) ## Oliver C Youtube video [here](https://www.youtube.com/watch?v=Vm1uSv3ZKd4) #### All these designs are tinkercad specials. Nothing super fancy, but quite functional. Big Shout out to oliver c for his original design. **Sabre_nose_dji_O3.stl**: * Nose that fits the DJI O3 Air Unit Camera * Large scoop up top, and 2 on the sides of the camera to cool the vtx **Sabre_nose_dji_OG.stl**: * Nose that fits the original DJI Air Unit/Vista camera * Large scoop up top, and 2 on the sides of the camera to cool the vtx **vista mount sabre.stl**: * Front sled for the sabre with 20x20 mounting. I printed in petg and sunk m2 brass fittings into the holes with a hot soldering iron around 230C. then just screw the vista in from the top. using some gummies underneath is recommended so airflow can get under the vista. * Glue in with ca glue to the front rails **FC mount matek sabre.stl**: * Rear sled for the sabre with mounting for a matek f405-wmn, and also the daughter breakout board for the buzzer and usb, to be mounted on an angle so usb access is easy. Also has mounting for a matek m8q-5883. I put vhb under each item and stuck them on. The main flight controller also got m2 screws. Glue this to the rear * Glue in with ca glue to the rear rails. Escs can mount under the sled for a clean look, but BE CAREFUL of the screw heads if you have the fc screwed in. **sabre mount.stl**: * Wall mount for the sabre. Stick to wall with 3m command strips.