S800 Nose and Canopy for Runcam Phoenix 2 and GoPro HERO7 - VERSION 2

thingiverse

Update 2020-07-24 Expanded the cutout for the HERO7 by 0.25% as it was a bit too snug. The Phoenix 2 camera is an uncased camera, don't force it to fit! The cutout for the phoenix 2 is designed for a loose fit but some printers might print it tight, in this case remove some material from the nose first, especially from the back where the camera is extra sensitive. Nose for S800 sky shadow with camera mount for Runcam Phoenix 2 with the 2.1mm lens and GoPro HERO5, HERO6 and HERO7. This design was created by myself but it's inspired by PlayerOneFPV. I want to give credit to Robschii for designing the 4s Haube that I modified with hinges. I also want to thank Oscarko for the GoPro Hero 7 model that I used for cutting. The Phoenix 2 model used for cutting was designed by myself. Use 100mm of piano wire or similar for the hinge. The nose is printed on its back with the camera pointing up, supports everywhere. The canopy is printed standing up with the hinges pointing up, supports everywhere. I used a 10mm brim when printing the canopy in petg, good bed adhesion is mandatory! Use the print settings and orientation described here https://www.thingiverse.com/thing:4008697