S21 Rokform case kick stand

thingiverse

Here is a kickstand I designed for my Samsung S21 with a Rokform Case. I used a piece of piano wire through the hinge and down the length of the horizontal arm that keeps the leg from folding in. A large paperclip will work as well. I pressed them in with a vise. The wire in the arm should be steel to catch on the cases magnet when closed. It will hold the phone in portrait or landscape. When closed, it fits nicely in your pocket. It does not need to be removed in order to use NFC devices but will need to be removed in order to wirelessly charge. The orientation on the plug works best lying flat on your print bed. The kickstand works best lying on its side for strength. You will need to print with supports. I used PLA because it is the easiest to print with and mine will not be left in direct sunlight however you should be able to print in PETG for higher heat tolerances.